settings reference

This is a list of everything that can be set in the settings screen.

1. PROFILE

   Allows choosing the active settings profile. See settings + profiles for more information.

2. midi settings

   See input/output (midi, i2c) for more information.

   • USB MIDI CHANNEL

     The MIDI Channel to use when sending note events via USB, from 0-15. Channels are sometimes also numbered 1-16 in other software or hardware.

   • TRS MIDI CHANNEL

     The MIDI Channel to use when sending note events via the TRS jack, from 0-15. Channels are sometimes also numbered 1-16 in other software or hardware.

   • MIDI VELOCITY (0-127)

     The velocity value sent with NOTE ON events.

3. i2c settings

   See input/output (midi, i2c) for more information.

   • I2C MODE

     • off: disable the i2c port.
     • leader: scan for follower devices when enabled and sync with them. Toggle this setting off and on again to re-scan.
     • follower: wait to be contacted by a leader device.

   • I2C ADDRESS

     The i2c address the device will listen on when in follower mode.

4. display settings

   • FLIP DISPLAY

     Whether to flip the oled display contents and the main grid 180°. Useful when boards are tiled with one another vertically.

   • RGB EFFECT

     The RGB scale highlighting effect.

   • RGB BRIGHTNESS (0-100%)

     Lowers the LED brightness, especially useful when filming or photographing the keyboard.

   • JAM MODE FADE TIME (0-20s)

     How quickly to fade out keys that have recently been pressed.

5. keyboard layout settings

   See isomorphic keyboard layouts for more information.

   • KEYBOARD LAYOUT
   • LAYOUT START NOTE